Dating fender stratocaster serial
The following six digits are the unit identifier, although it should be noted that these final six numbers are not sequential and do not provide any other identification information about the instrument. S.-made Fender instruments, with exceptions including the American Vintage series and certain special-run instruments.
“10” prefix followed by a space and seven digits (late 2009 through March 2010)US10 6 digits (beginning in about March 2010) V 5 or 6 digits (American Vintage Series except ’52 Telecaster, which uses a five-digit number stamped into the bridge plate) If you’re unable to identify the approximate production year of your instrument using the above charts, several excellent books are available that contain invaluable and reliable information on the history of Fender instruments. They are detailed reference resources with a wealth of information on determining the production years of various instruments and on Fender history in general.
The chart below details Fender serial number schemes used from 1965 to 1976.
SERIAL NUMBERS were stamped on the back vibrato cover plate on early ’50s Stratocaster® guitars, and on the bridge plate between the pickup and the saddles on some Telecaster® guitars.Therefore, while helpful in determining a of PRODUCTION DATES, a neck date is obviously not a precisely definitive reference.Most specifications for a given Fender instrument model change little (if at all) throughout the lifetime of the model.Neck-dating can be useful in determining the was produced, rather than the complete instrument.Given the modular nature of Fender production techniques, an individual neck may have been produced in a given year, then stored for a period of time before being paired with a body to create a complete guitar, perhaps, for example, in the following year.